ECHOtherm IC25


產品型號:ECHOtherm IC25
 產品名稱:ECHOtherm IC25
ECHOthermTM Model IC25 Digital, Programmable, Electronic Chilling/Heating Plate
Your Fully Programmable Personal Bench Top Incubator/Chiller/Freezer 

Model IC25 Features:
? 5-program memory
? Energy efficient Peltier design
? Digital control to 1°C from -10°C to 100°C
? Control at ambient
? Built-in data logger
? Count down timer (up to 30 days) with audible alarm and user settable Auto-Off
? RS232 I/O port for data collection
? Electronic calibration. Factory set, but user settable to any local standard
? Small, compact size. Uses very little bench space
? 12 volt DC operation. External power supply provided
? 12 month warranty
? UL, CSA and CE compliant
Some IC25 Applications: 
? Unattended restriction digestions or ligations at elevated temperatures then reducing temperature to 4°C automatically to reduce non-specific nuclease digestion of target DNA 
? Automatically stopping reactions by having the unit reduce sample temperature after a specific reaction time 
? Produce denatured probes or single stranded DNA molecules by heating to 90°C to 95°C for a given time and rapidly reducing temperature to 4°C to prevent renaturation 
? Automatic temperature profiles to grow bacteria at 37°C, then increasing temperature to induce events, and then lowering temperature to 4°C to prevent degradation 
? Maintain 14°C for ligation reactions 
? Maintain 17°C for storing oocytes 
? Store samples at ice bucket temperatures without the mess 
? Incubate samples at 37°C in 96-well assay plates or in aluminum blocks holding 0.2, 0.5, 1.5 ml centrifuge tubes, vials, and test tubes 
? Store enzyme or DNA libraries at your work station 
? Enzyme reactions and deactivations 
? Cool blood samples prior to coagulation testing 
? Freeze and store most any sample at your work station 
Product Description:
Torrey Pines Scientific’s Model IC25 Programmable, Digital, Electronic Chilling/Heating Plates are compact, completely solid state, versatile, reliable, and easy to use. They run from a manufacturer supplied 12 volt dc power supply. The IC25 has simple digital controls and a two-line alphanumeric display that is backlit for easy reading. The display normally shows the target and actual temperatures. Additionally, it is used to display temperature, timer, and all programming functions. 

To set a target temperature, simply push the UP or DOWN arrows until the display shows the desired target temperature. The unit will then go to that temperature. Writing programs is simple as well and done through the UP and DOWN arrows on the membrane switch. Calibration is factory set, but calibration is settable by the user to any local standard. 
Calibration is electronic and accessed through the keyboard and stored in CMOS.

There are POWER and BUFFER lamps on the front panel. The POWER lamp indicates when the unit is turned on. The BUFFER lamp flashes when the buffer is collecting data. The lamp illuminates constantly when the buffer is full and needs to be downloaded. The buffer can be set to collect temperature data points in 1 second, 1 minute or 5 minute intervals to 7825 data points equivalent to 130 minutes at 1 point/second, 130 hours at 1 point/minute and 27 days at 1 point/every 5 minutes. The IC25 is provided with an RS232C interface. This can be used to record data for monitoring agencies. 
The chilling/heating surface is a 2.875” (7.3 cm) x 4.375” (11.1 cm) aluminum plate that is very flat for good contact with the sample. When unloaded, the plate will go below 0°C in under two minutes. It will heat to 37°C even faster. Generally, the unloaded surface will decrease temperature at about 3°C/minute. Heating rates on the unloaded plate are usually about 5°C/minute. The blocks sold as accessories range in size and mass depending upon the samples used. The unit can drive the biggest block from ambient to 4°C in less than 30 minutes. When used with an accessory cover these blocks can be driven below 0°C. Temperature gradients from the center to the edge of any accessory block will be less than 0.5°C at any temperature.

Product Specification:
Range -10°C to 100°C (minimum temperature possible is 30°C below ambient)
Readability 1 °C
Accuracy ±1 °C
Stability ±1 °C
Sensor Type Solid State IC
Controller Type PID
Uniformity ±0.5 °C

Range 00:01 to 30 days
Readability 1 second
Audible Alarm Yes, sounds for 1 minute. Timer counts up until UP or Down key is touched

Programs Stored 5
Individual Program Capacity 10 Steps
Program Repeat 1 to 99 times
Memory Backup Yes, in CMOS

Data Logger: 
Sample times 1 sec, 1 min, or 5 minutes per data point
Capability 7825 data points

Heater/Chiller Peltier, 50 watts
Operating Voltages From 90 to 265 volts AC into universal power supply. 12 VDC output to chiller/heater module.
Power Consumption 50 watts maximum
Power Switch Yes

Chilling/Heating Module  
Width 6.5" (16.5 cm)
Depth 8.75" (22.23 cm)
Height 3.5" (8.9 cm)
Power Supply   
Length 6.5" (16.5 cm)
Height 3.2" (8.1 cm)
Width 2.2" (5.6 cm)
Weight (power supply & chiller/heater module) 8 pounds (3.6 kgs)

Accessories Available:
620-5012 Block, aluminum, 40 holes for 0.5 ml centrifuge tubes.
620-5013 Block, aluminum, 30 holes for 1.5 ml centrifuge tubes.
620-5014 Block, aluminum, 40 holes for 0.5 ml and 15 holes for 1.5 ml
620-5015 Block, aluminum, 96 holes for 0.2 ml PCR tubes spaced for 8 and 12 tube strips.
620-5016 Block, aluminum, for "V" bottom 96-well assay plates
620-5017 Block, aluminum, for round bottom 96-well assay plates
620-5018 Block, aluminum, 24 holes for 2.0 ml vials
620-5019 Block, aluminum, 384 holes for 384-well assay plates
620-5020 Block, aluminum, for flat bottom 96 and 384-well assay plates
620-5021 Block, aluminum, 24 holes for 10 mm test tubes
620-5022 Block, aluminum, 12 holes for 15/16 mm test tubes
620-5023 Block, aluminum, 20 holes for 12/13 mm test tubes
620-5024 Block, aluminum, mixed holes for various sized test tubes
620-5025 Block, aluminum, 8 holes for 20 mm test tubes
620-5026 Block, aluminum, 30 holes for 6 mm test tubes
620-5027 Block, aluminum, 12 holes for 15ml centrifuge tubes 
620-5028 Block, aluminum, 12 holes for 20ml scintillation vials 
620-5030 Block, aluminum, 6 holes for 50ml centrifuge tubes
620-5031 Block, Aluminum, 4-slides for hybridizations, with black cover
620-5032 Block, Aluminum for 30-2.0ml Eppendorf centrifuge tubes
720-0008 Cover, assay plates and all assay plate blocks, 1.75" high
720-0009 Cover, aluminum blocks, 3.25" high

ECHOthermTM Model IC25 Digital, Programmable, 
Electronic Chilling/Heating Plate
Your Fully Programmable Personal Bench Top Incubator/Chiller/Freezer 


您現在的位置:首頁 > 產品展示